If you know something about SF6 gas recovery device, everyone should know that the device has basic functions such as vacuuming, recovery and storage, filling and discharging, bottle filling and purification and drying, as well as corresponding combined functions.

As long as the equipment you purchase is? high quality and can be used in strict accordance with the correct operation method, then its service life can be extended to the greatest extent. In order to let everyone have a better understanding of it, the editor of HV Hipot will introduce in detail what are the precautions for the use of SF6 gas recovery equipment?

? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ??

? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? HV Hipot GDQH-601 Series SF6 Gas Recovery Device

First, because the SF6 gas recovery device is not a simple device, it is best to let a trained professional to operate it, and the relevant personnel need to check whether each connection part is properly connected before using it, and the airtightness of each interface Is it good? It can be said that the inspection work before use is very important and must be given enough attention.　　

Second, for the vacuum pump of the SF6 Gas Recovery Device, everyone must ensure that it cannot be reversed, and the oil level of its components must also be guaranteed to absolutely meet the requirements. If an abnormal situation occurs during the operation of the device, it is necessary to deal with it even at the same time by relevant personnel.

Third, when using the SF6 gas recovery device to recover gas, everyone needs to turn on the refrigeration system half an hour in advance. Since a small amount of condensate will be discharged when the refrigeration system is turned on, the electrical selenium draft needs to be appropriate for this condensate. Do the next treatment.　

Fourth, the molecular sieve of the SF6 gas recovery device needs to be replaced when it is used for almost 10,000 hours. The filter element of the equipment is also the same. It also needs to be replaced in time when it reaches 5,000 hours.