MRT-10 Insulation Resistance Tester
物圖14.jpg)
物圖31.jpg)
物圖21.jpg)
??Covers IR/DAR/PI/DD/SV full-function test modes, and realizes dual-mode calculation of DAR absorption ratio.
?The three-in-one operation matrix of key control, touch screen, and knob mouse simplifies the operation link to the extreme, making the test more flexible and faster.
??Multi-level voltage range can be switched arbitrarily, and custom voltage mode is supported.
? Real-time recording and visualization of insulation resistance-voltage-current time curve, supporting transient analysis of insulation state.
??With AC and DC voltage measurement function, it can automatically identify voltage type and measure AC frequency.
?With cable length measurement function, equipped with controllable hardware and software filters, the anti-interference performance is significantly improved.
??Three safety barriers, including independent discharge circuit, sample breakdown protection and arc detection, not only protect the equipment safety, but also accurately lock the insulation weak points to prevent accidents.
?High and low voltage circuit full isolation architecture to ensure the safety of operators.
??With USB storage function, data can be exported to USB flash drive in batches for easy backup and migration.?
|
Test Voltage |
100V,?250V,?500V,?1000V,?2500V,?5000V,?10000V |
|
Full-scale resistance?value?corresponding to the test voltage |
200GΩ, 500GΩ,?1.00TΩ, 2.00TΩ, 5.00TΩ,?10.0TΩ, 20.0TΩ |
|
Custom test voltage |
50V-10000V,?minimum?step ?10V;?when?using rotating mouse to control,?the?step?value?automatically?switches?between?10V,?100V,?and?200V?with?the speed, and the higher the speed, the?larger the?step. |
|
Voltage output?accuracy |
0%~+10% |
|
? Resistance range?and?resolution |
0-9.99kΩ 0.01kΩ; 10.0-99.9kΩ 0.1kΩ;
100-999kΩ 1kΩ; 1.00-9.99MΩ 10kΩ; 10.0-99.9MΩ 100kΩ; 100-999MΩ 1MΩ; 1.00-9.99GΩ 10MΩ; 10.0-99.9GΩ 100MΩ; 100-999GΩ 1GΩ; 1.0-9.99TΩ 10GΩ; 10.0-20.0TΩ 100GΩ. |
|
Short circuit current |
1mA-6mA, adjustable, step 1mA
Accuracy: ±5%, continuous output power: 55W. |
|
Test time |
10 seconds to 99?minutes adjustable |
| Voltage measurement | AC/DC?10V-660V, ±?(2%+3 digits) |
| AC?voltage?frequency | 25Hz-85Hz, resolution 0.1Hz, accuracy ±0.2Hz |
| Capacitance?measurement | ?
10nF-25μF, test voltage ≥100V, accuracy: ±10%±5nF |
| Capacitance test
sample discharge?rate |
?
From?10kV to 50V, ≤0.47s/μF |
| AC?power supply | 85-264Vrms, 50/60Hz, 65VA |
| Built-in?battery | 16.8V, 4400mAH?lithium?battery |
| Built-in charger | 16.8V, 2.3A |
| Battery?life | 10kV@100MΩ load, about 5?hours |
| Use temperature | -10℃~50℃ |
| Relative humidity | <90%, no?condensation. |
| Dimensions | 320mm*280mm*200mm |
|
Weight |
About 4.2kg |
| Voltage measurement | AC/DC?10V-660V, ±?(2%+3 digits) |
| AC?voltage?frequency | 25Hz-85Hz, resolution 0.1Hz, accuracy ±0.2Hz |
線(xiàn)高低壓語(yǔ)言核相器-實(shí)物圖1-300x300.jpg)
物1-300x300.jpg)
